Roller Limit switches
- Thermal rating 10A
- Short circuit rating 10A (max 500Vac, type gG)
- AC15 contact ratings (e.g AC solenoids): 10A@24Vac, 6A@230Vac 3A@230Vac,
1.9A@400Vac
- DC13 contact ratings (e.g. DC solenoids): 2.8A@24Vdc
- Metal (FA series) and thermoplastic (FT series) variants in stock
- IP65 (FT) or IP66 (FA)
FT139Z11
- Double insulated IP65 thermoplastic
- Adjustable length and angle of roller
- 18mm plastic roller
- 1 cable entry M16 x 1.5
- 1 x NO, 1x (positive-break) NC snap acting contact
FA139Z11
- IP66 Metal housing
- Adjustable length and angle of roller
- 18mm plastic roller
- 1 cable entry M16 x 1.5
- 1 x NO, 1x (positive-break) NC snap acting contact
FT1R39Z02
- Double insulated IP65 thermoplastic
- Adjustable length and angle of roller
- Once tripped, requires manual reset (pull blue reset knob)
- 18mm plastic roller
- 1 cable entry M16 x 1.5
- 2 x (positive-break) NC snap acting contact
Safety interlock switches
- For the protection of access etc.
- Rotary hinge types
- Tag/socket types
ST1K15X11
- Double insulated IP65 thermoplastic
- Tamper-proof tongue design
- For use on gates/doors
- 1 x NO, 1 x positive break NC contact
Flat cable glands
- Specially designed for bringing flat (catenary/festoon) cables into electrical
enclosures
- Versatile rectangular and circular variants available.
12903010
- To suit flat cable up to 6mm x 56mm
Horns
- Electro-mechanical warning horns in a range of AC and DC voltages
- Distinctive and penetrating sound (not piezoelectric)
- Designed to mount in electrical cubicles (especially the bottom surface)
- Uses the panel as a sound-box for amplification
G75 - 75mm Diameter
- Duty cycle - 100%
- Frequency approximately 50Hz
- Volume (at one metre) 88dBA
- Environmental protection IP30
- PE Terminal
G75.24: 24Vac / 190mA
G75.48: 48Vac / 80mA
G75.110: 110Vac / 28mA
G75.230: 230Vac / 20mA
G75.24DC: 24Vdc / 40mA
G100 - 100mm Diameter
- Duty cycle - 100%
- Frequency approximately 300-350Hz
- Volume (at one metre) 93.5dBA
- Environmental protection IP65
- Double insulated
G100.24: 24Vac / 415mA
G100.48: 48Vac / 210mA
G100.110: 110Vac / 90mA
G100.230: 230Vac / 42mA
Emergency-Stop Stations
- Positive-break Emergency STOP stations
- PUSH-PULL and twist-to-release versions
- Vision versions with green/red window to quickly show status
- Easy wiring and installation
- Rugged double-insulated enclosures
- Self-extinguishing thermoplastic
- Sealed to IP65
- Standard click-on contact blocks - up to 3 contacts per button
- Contacts with 16A (thermal) rating, 690V insulation voltage
- NO contacts are slow-break, double-gap, self-cleaning
- NC contacts are positive break so suitable for Emergency-Stop use (EN418 etc)
- AC15 contact ratings (e.g AC solenoids): 16A@24Vac 5A@230Vac, 4A@400Vac
- DC13 contact ratings (e.g. DC solenoids): 4A@24Vdc
- Fuse rating gG-10A/500V
GM01P4SP
- Push to Stop / pull to run
- 1 x NC positive-break contact, 1 x NO contact for indication
- 40mm button which shows Green when released, Red when stopped
- Fitted with guard to prevent accidental stoppages and releases
- Guard also prevents button being used as a hanger which can block the button and create a
hazard
We stock a range of Italian-made accessories that are commonly needed for crane and mobile machine installations.
FT133Z11
- Double insulated IP65 thermoplastic
- Angled 12.5mm plastic roller
- Vertical actuation
- 1 cable entry M16 x 1.5
FA133Z11
- IP66 Metal housing
- Angled 12.5mm plastic roller
- Vertical actuation
- 1 cable entry M16 x 1.5
ST1K71X11
- Double insulated IP65 thermoplastic
- Suits rotating guards/doors
- Internal diameter 8.2mm
- 1 x NO, 1 x positive break NC contact
ST1K89X11
- Double insulated IP65 thermoplastic
- Rotating turret (360
o
)
- Tamper-proof adjustable tongue
- 1 x NO, 1 x positive break NC contact