Giovenzana PL series Control Pendants
Our PL pendants are available in a range of sizes, and are completely customisable to your
requirements.
- Single-column linear design
- Easy wiring and installation
- Rugged double-insulated enclosures
- Self-extinguishing thermoplastic
- Sealed to IP65
- Standard click-on contact blocks - up to 3 contacts per button
- Contacts with 16A (thermal) rating, 690V insulation voltage
- NO contacts are slow-break, double-gap, self-cleaning
- NC contacts are positive break so suitable for Emergency-Stop use (EN418 etc)
- AC15 contact ratings (e.g AC solenoids): 16A@24Vac 5A@230Vac, 4A@400Vac
- DC13 contact ratings (e.g. DC solenoids): 4A@24Vdc
- Fuse rating gG-10A/500V (aM-12A/500V for DC30)
Standard Configurations
Custom Designs
We can custom-build for you a pendant to meet your exact needs. The PL series is available in 5, 7, 8, 10, and 12-Hole configurations. The kits (PL05K, PL07K) are complete with: Cable Gland/Sleeve suit 7-18mm cable OD (PL05), 9-21mm cable OD (PL07, PL08, PL10, PL12) Cable Clamp for strain relief Contact Block mounting frames Mechanical interlocks (can be omitted if not needed) Screws, Gasket
Custom Labelling
We can custom-build for you a pendant to meet your exact needs.
Our unique process allows us to create full-colour graphics that are reverse-printed on
automotive-grade 200-micron polyester film. With excellent adhesion and chemical
resistance, these labels stand up to the rigours of industrial use.
PL05D4E (for monorails)
- Emergency-Stop (2 x NC Contacts)
- 2 Speed Buttons
UP
DOWN
FORWARD
REVERSE
-Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
PL08D6E (for Standard Cranes with Start/Horn)
- Emergency-Stop (2 x NC Contacts)
- Green Button (Start/Horn) 1 x NO contact
- 2 Speed Buttons
UP
DOWN
NORTH
SOUTH
EAST
WEST
- Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
EAST-WEST
PL07D4E (for monorails with Start/Horn)
- Emergency-Stop (2 x NC Contacts)
- Green Button (Start/Horn) 1 x NO contact
- 2 Speed Buttons
UP
DOWN
FORWARD
REVERSE
- Blank Hole (Bung)
- Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
PL07D6E (for Standard Cranes)
- Emergency-Stop (2 x NC Contacts)
- 2 Speed Buttons
UP
DOWN
NORTH
SOUTH
EAST
WEST
- Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
EAST-WEST
PushButtons
available in the following laser-engravings
UP / DOWN
NORTH / SOUTH
EAST / WEST
IN / OUT
FORWARD / REVERSE
OPEN / CLOSE
LEFT / RIGHT
also
Blank White / Black / Red / Green
Latching Selectors
0-1 - for lights, etc (90 degree)
1-0-1 - for hoist-select, etc (+/- 45 degree)
Momentary Selectors
1-0-1 (+/- 45-degree)
Latching Keyswitches
0-1 limit override, etc. (90 degree)
1-0-1 (+/- 45 degree)
Potentiometers
standard 10k linear
also available in 1k-500k
PWM driver board available for
direct control of hydraulic valves
LED Lamps
12-24 Vac/dc Green/Yellow/Red
Lamp Holder (Ba9s)
Green / Yellow / Red / Blue / White
Giovenzana PL series Control Pendants
Our PL pendants are available
in a range of sizes, and are
completely customisable to
your requirements.
- Single-column linear
design
- Easy wiring and
installation
- Rugged double-
insulated enclosures
- Self-extinguishing
thermoplastic
- Sealed to IP65
- Standard click-on contact blocks - up to 3 contacts
per button
- Contacts with 16A (thermal) rating, 690V insulation voltage
- NO contacts are slow-break, double-gap, self-cleaning
- NC contacts are positive break so suitable for Emergency-Stop use (EN418 etc)
- AC15 contact ratings (e.g AC solenoids): 16A@24Vac 5A@230Vac,
4A@400Vac
- DC13 contact ratings (e.g. DC solenoids): 4A@24Vdc
- Fuse rating gG-10A/500V (aM-12A/500V for DC30)
Standard Configurations
Custom Designs
We can custom-build for you a pendant to meet your exact needs. The PL series is available in 5, 7, 8, 10, and 12-Hole configurations. The kits (PL05K, PL07K) are complete with: Cable Gland/Sleeve suit 7-18mm cable OD (PL05), 9-21mm cable OD (PL07, PL08, PL10, PL12) Cable Clamp for strain relief Contact Block mounting frames Mechanical interlocks (can be omitted if not needed) Screws, Gasket
Custom Labelling
We can custom-build for you a pendant to meet your exact
needs.
Our unique process allows us to create full-colour graphics
that are reverse-printed on automotive-grade 200-micron
polyester film. With excellent adhesion and chemical
resistance, these labels stand up to the rigours of industrial
use.
PL05D4E (for monorails)
- Emergency-Stop (2 x NC Contacts)
- 2 Speed Buttons
UP
DOWN
FORWARD
REVERSE
-Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
PL08D6E (for Standard Cranes with Start/Horn)
- Emergency-Stop (2 x NC Contacts)
- Green Button (Start/Horn) 1 x NO contact
- 2 Speed Buttons
UP
DOWN
NORTH
SOUTH
EAST
WEST
- Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
EAST-WEST
PL07D4E (for monorails with Start/Horn)
- Emergency-Stop (2 x NC Contacts)
- Green Button (Start/Horn) 1 x NO contact
- 2 Speed Buttons
UP
DOWN
FORWARD
REVERSE
- Blank Hole (Bung)
- Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
PL07D6E (for Standard Cranes)
- Emergency-Stop (2 x NC Contacts)
- 2 Speed Buttons
UP
DOWN
NORTH
SOUTH
EAST
WEST
- Mechanical Interlocks Fitted (removable)
UP-DOWN
FORWARD-REVERSE
EAST-WEST
PushButtons
available in the following laser-engravings
UP / DOWN
NORTH / SOUTH
EAST / WEST
IN / OUT
FORWARD / REVERSE
OPEN / CLOSE
LEFT / RIGHT
also
Blank White / Black / Red / Green
Latching Selectors
0-1 - for lights, etc (90 degree)
1-0-1 - for hoist-select, etc (+/- 45 degree)
Momentary Selectors
1-0-1 (+/- 45-degree)
Latching Keyswitches
0-1 limit override, etc. (90 degree)
1-0-1 (+/- 45 degree)
Potentiometers
standard 10k linear
also available in 1k-500k
PWM driver board available for
direct control of hydraulic valves
LED Lamps
12-24 Vac/dc Green/Yellow/Red
Lamp Holder (Ba9s)
Green / Yellow / Red / Blue / White
