IndustryIQ specialises in the design, supply, and servicing of safety radio remote controls for lifting applications. We have solutions and accessories for all types of
lifting machines:
Overhead Travelling Cranes (OHTC), Jib-cranes, and Portal Cranes
This type of crane is almost always fitted with a radio remote control. All of our handheld remotes are very well suited to the task and
can be used on single or dual-hoist cranes with either single or dual-speed control. Where load displays or other graphic screens are
required, then the LKNeo-DF is a perfect choice. For cranes with underhook attachments, magnets, or large capacity cranes with many
speeds, our AIr-series joystick controllers are the perfect choice.
We offer many types of multiple-transmitter, and multiple-receiver solutions, including Master-Slave and Take-Release systems. We
design and engineer these systems in Australia, so can built it to safely achieve your objectives.
Our pendant controllers proved a back-up solution, or a low-cost alternative to radio control, with the PL series being the most widely
used.
When fitting radio controls on cranes, AS1418.1 generally requires that limit switches be fitted to the travel motions. There is
no solution simpler, more reliable, or easier to install than our FCR006 rotary limit switch which provides slow-down and stop switches
for both direction using a single switch that does not require adjustment.
When building or overhauling cranes, our FGR rotary limit switches are commonly used as a simple and robust solution for setting hoist
drum limits. Available in a range of gear-reductions to suit a wide variety of applications.
In the control cabinet we have an excellent range of electro-mechanical horns that are typically panel-mounted,
and provide a distinctive, easily-heard sound in factory environments filled with electronic sirens of various types.
Specialised flat cable glands, and limit switches round out the range
Chain hoists and Monorails
Our P03 and P02 pendants are a superb, low-cost solution for machines of this type. Available in single-speed and dual-speed
buttons, they also come with and without Emergency-Stop.
Expert Advice
Our Technical Support team consists of Electrical Engineers with broad experience in cranes. We can design a solution specifically for you at no additional cost - just
give us a call or send us your drawings and we will take it from there.
IndustryIQ specialises in the design, supply, and servicing of safety radio remote
controls for lifting applications. We have solutions and accessories for all types of lifting
machines:
Overhead Travelling Cranes (OHTC), Jib-cranes, and Portal Cranes
This type of crane is almost always fitted with a
radio remote control. All of our handheld remotes are very
well suited to the task and can be used on single or dual-
hoist cranes with either single or dual-speed control.
Where load displays or other graphic screens are
required, then the LKNeo-DF is a perfect choice. For
cranes with underhook attachments, magnets, or large
capacity cranes with many speeds, our AIr-series joystick
controllers are the perfect choice.
We offer many types of multiple-transmitter, and
multiple-receiver solutions, including Master-Slave and Take-Release systems. We design
and engineer these systems in Australia, so can built it to safely achieve your objectives.
Our pendant controllers proved a back-up solution,
or a low-cost alternative to radio control, with the PL series
being the most widely used.
When fitting radio controls on cranes,
AS1418.1 generally requires that limit switches be
fitted to the travel motions. There is no solution
simpler, more reliable, or easier to install than our
FCR006 rotary limit switch which provides slow-down
and stop switches for both direction using a single
switch that does not require adjustment.
When building or overhauling cranes, our FGR rotary limit
switches are commonly used as a simple and robust solution for
setting hoist drum limits. Available in a range of gear-reductions to
suit a wide variety of applications.
In the control cabinet we
have an excellent range of electro-
mechanical horns that are typically
panel-mounted, and provide a
distinctive, easily-heard sound in
factory environments filled with
electronic sirens of various types.
Specialised flat cable glands, and
limit switches round out the range
Chain hoists and Monorails
Our P03 and P02 pendants are a superb, low-cost
solution for machines of this type. Available in single-speed
and dual-speed buttons, they also come with and without
Emergency-Stop.
Expert Advice
Our Technical Support team consists of Electrical Engineers with broad experience
in cranes. We can design a solution specifically for you at no additional cost - just give us
a call or send us your drawings and we will take it from there.
